China Testing Instruments Manufacturer,Whatsapp/Wechat:+8618620373879  Email: 464560351@qq.com

TesterMeter-ETCR9000B Wireless High Voltage and low voltage Clamp Current TesterMeter.cn
TesterMeter-ETCR9000B Wireless High Voltage and low voltage Clamp Current TesterMeter.cn
TesterMeter-ETCR9000B Wireless High Voltage and low voltage Clamp Current TesterMeter.cn
TesterMeter-ETCR9000B Wireless High Voltage and low voltage Clamp Current TesterMeter.cn
TesterMeter-ETCR9000B Wireless High Voltage and low voltage Clamp Current TesterMeter.cn
TesterMeter-ETCR9000B Wireless High Voltage and low voltage Clamp Current TesterMeter.cn
TesterMeter-ETCR9000B Wireless High Voltage and low voltage Clamp Current TesterMeter.cn
TesterMeter-ETCR9000B Wireless High Voltage and low voltage Clamp Current TesterMeter.cn

TesterMeter-ETCR9000B Wireless High Voltage and low voltage Clamp Current TesterMeter.cn

2023-07-06 14:37:17  

ETCR9000B Wireless High Voltage and low voltage Clamp Current Meter

  • Main Feature : 1. Measurement of H/L Voltage AC current (operate with insulation rod above 600V) 2. Range: 0mA~1200A 3. Resolution: 1mA 4. Wire Transmission: 30M 5. Peak Hold, Data Storage: 99 Groups 6. Line Voltage: Test of the wire with insulation skin below 60kV, test of bare wire below 35kV (operate with insulation rod) 7. CT Size: Φ48mm
  • Serial No. :
Contact Us For QuotationEmail:  464560351@qq.comWhatsapp&Wechat:+8618620373879

INTRODUCTION

ETCR9000B H/L Voltage Clamp Current Meter adopts CT  technology and mask digital integration technology, the instrument composed of special clamp current meter and  high voltage insulation rod, Wireless transmission of test data, equipped with wireless receiver, can receive the tested data within 30M straight-line distance, If not use  insulation rod, which can be used as high accuracy low voltage clamp current meter.

ETCR9000B H/L Voltage Clamp Current Meter connect with insulation rod, which can use for hight voltage line current measurement of the wire with insulation skin below 60KV or  bare wire below 35KV, online current measurements, also with peak hold, data hold and data storage and so on function, the special clamp current meter convenient to clamp or withdraw the tested wire operate by push or pull back the insulation rod.It is widely used in substations, power plants, industrial and mining enterprises, inspection stations, electrical maintenance departments for current detection and electrical field operations. It can replace the H/L voltage transformation ratio tester, which can measure the H/L voltage current of the primary circuit and the secondary circuit respectively, and then calculate the H/L voltage transformation ratio. The insulation rod is light, has the characteristics of moisture-proof, high temperature resistance, impact resistance, bending resistance, high insulation, scalable and so on.

SPECIFICATION

FunctionDescription
Function H/L voltage AC current measurement
Power Supply DC 6V(1.5V AAAx4)
Test Mode Clamp CT, integration method
Transmission Mode 433Hz wireless transmission, transmissiondistance30M
Display Mode 4 digital LCD display, backlight function, suitable for dim place
LCD Size 47mm×28.5mm
Meter Size Detector: 76mm×255mm×31mm; Receiver: 78mm×165mm×42mm
CT Size Φ48mm
Sampling Rate 2 times/second
Measurement Range 0mA~1200A (50/60Hz automatic)
Max Resolution 1mA
Shift 0mA~1200A full-automatic
Test Accuracy (23℃±5℃,below80%RH) 0mA~99.9A:    ±1%±5dgt 
100A~599A:      ±1.5%±5dgt
600A~1200A:   ±2%±5dgt
Data Storage 99 groups, in storage process "MEM" symbol display, "FULL" symbol flashes display indicate storage full
Line Voltage  Below 110kV current test , operate with insulation rods ( below 500kV can be customized,only for ETCR9000B)
Data Hold Press HOLD key to hold data in test mode, “HOLD” symbol display, press HOLD key once again cancel this function
Data Access "MR" symbol display, can look up all storage data
Overflow Display Exceed measure range overflow function: "OL A" symbol display
No Signal Indication When the receiver has not received transmit signal, dynamic display “no- -”symbol
Auto Shut Down 15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption
Battery Voltage When battery voltage is lower than 4.8V, low battery voltage symbol will display and remind to replace battery.
Meter Weight 3630g (include insulation rod)
Working Environment -10℃~50℃;below 80%rh
Store Environment -10℃~60℃;below 70%rh
Interference No interference of 315MHz and 433MHz same frequency signals
Insulation Rod Size Φ32mm,1m/pcs(5pcs)
Insulation Strength AC110kV/rms(all 5PCS insulation rod connect, between the two ends)

Selection Guide

ModelDescriptionRangeResolutionClampNote
ETCR9000H/L Voltage Clamp Current Meter0mA~1200A1mAΦ48mm Base type
ETCR9000BWireless H/L Voltage Clamp Current MeterWireless type
ETCR9020H/L Clamp Leakage Current Meter0.00mA~60.0A0.01mAΦ48mm Base type
ETCR9020BWireless H/L Clamp Leakage Current MeterWireless type
ETCR9100H/L Voltage Clamp Current Meter0.00mA~600A0.01mAΦ33mm Base type
ETCR9100BWireless H/L Voltage Clamp Current MeterWireless type

Packing Details

Package Outer Package Carton
Inner Package Cloth bag
Accessory Detector 1 PCS
Receiver
1 PCS
Wireless Antenna
1 PCS
Insulation Rod(1M) 5 PCS
Tool Bag 1 PCS
Manual 1 PCS
Certificate 1 PCS
Warranty Card 1 PCS



图片关键词


Telephone
Email
Map
QQ Chat