English
| Contact Us for Quotation | Email: mewoi008@mewoi.com | Whatsapp:+8619928420370 |
Testermeter-PT-2740 (300kHz,2A-500A)current probe
INTRODUCTION
Testermeter-PT-2740 - Current measurement range from 0.4A to 500A (two-gear conversion). - Current clamp is the use of Hall effect technology to measure AC/DC current.- Can measure the RMS value under AC/DC signal - Low phase displacement ensures accurate voltage output of the measured power. - Can be used with multimeters, recorders, acquisition units, oscilloscopes, etc. | ||
Technical Specfication
Model | Testermeter-PT-2740 |
Measuring range | 2A~60A 60A~500A |
Conversion ratio | 20mV/A（50:1） 2mV/A（500:1） |
Bandwidth | DC-300kHz |
Accuracy | 2% |
Rise time | 1.2μs |
Working Voltage | 600V |
Battery | 9V alkaline battery |
Low battery Indicate | with green LED light when >6.5V |
Overload indicator | Red LED light indicates the over measuring current, change the range |
Clamp.Dia. | 11mm Diameter |
Operating temperature | 0~﹢50℃ |
Cable length | 2m |
Size | 231*36*67 mm |
Weight | 330g（including battery) |
Selection Guide
| Model | Testermeter-PT-710 | Testermeter-PT-2710 | Testermeter-PT-2720 | Testermeter-PT-2740 |
| Measuring Range | 0.05A-10A 10A-100Apeak | 0.4A-10A 10A-60A | 0.4A-10A 10A-200A | 2A-60A 60A-500A |
| Conversion Ration | 100mV/A(10:1) 10mV/A(100:1) | 50mV/A(20:1) 5mV/A(200:1) | 50mV/A(20:1) 5mV/A(200:1) | 20mV/A(50:1) 2mV/A(500:1) |
| Bandwidth | DC-100kHz | DC-200kHz | DC-300kHz | DC-300kHz |
| Accuracy | 2% | 2% | 2% | 2% |
| Rise time | 3.5μs | 1.75μs | 1.2μs | 1.2μs |
| Working Voltage | 600V | 600V | 600V | 600V |
| Battery | 9V alkaline battery | |||
| Low battery Indicate | When greater than 6.5V, the LED is green | |||
| Overload indicator | The red LED indicates that the measurement current is too high and the range needs to be changed | |||
| Clamp.Dia. | Diameter 11mm | |||
| Operating temperature | 0-+50℃ | |||
| cable length | 2m | |||
| Size | 231x36x67mm | |||
| Weight | 330g（include battery） | |||
| Temperature and humidity | 0-50℃、20-75% RH | |||
Lable:
current probe
