Contact Us For Quotation | Email: 464560351@qq.com | Whatsapp&Wechat:+8618620373879 |
Xtester-TPCM6085
Xtester-TPCM6085 series high-voltage power supply adopts a compact design, has efficient adjustment ability, and can output low ripple high voltage.Compared with traditional high-voltage modules, the size of TPCM6085 series modules is greatly reduced, and advanced offline resonant converter technology is adopted. The resonant converter adopts a unique control scheme to maintain high efficiency while running at constant frequency. Zero current switch (ZCS) resonance control technology is used. The working frequency is usually 60.KHz.TPCM6085 series high-voltage power supply voltage and current can be Transfer. Monitoring and control signals are simple and flexible. TPCM6085 series high-voltage power supply input range is 85 -265VAC (50/60hz single-phase).Use active power factor correction. Typical Application:PCB detection, electrostatic field,insulation voltage resistance test,detector, electrophoresis, cable test |
FEATURES
· Output voltage 50kV (other voltages can be customized) · Output power 85W · Power factor: better than0.99 · Digital programmable · Overvoltage · overcurrent · short circuit · arc and over-temperature protection · Secure interlock function · Can be customized according to user requirements. |
PRODUCT SPECIFICATIONS
Input 85 -265VAC, 50/60hz single-phase Output 50kV, positive or negative polarity optional Power factor Full load 0.99 No load 0.98 Voltage control External analog control External 0 to 10V control signals can adjust the output from 0 to the maximum output voltage. Digital communication control Through the RS-485 communication interface, the output can be adjusted from 0 to the maximum voltage according to the standard Modbus communication protocol. Optional)) Current control External analog control The external 0 to 10V control signal can adjust the output from 0 to the maximum current. Digital communication control Through the RS-485 communication interface, the output can be adjusted from 0 to the maximum current according to the standard Modbus communication protocol. Optional)) Voltage adjustment rate Relative load 0.01% (noload to rated load). Relative input ±0.01% (input voltage change is ±10%). Current adjustment rate Relative load 0.01% (noload to rated load). Relative input ±0.01% (input voltage change is ±10%). Ripple voltage Rated output conditions, better than 0.1‰p-p. Ambient temperature When working 0°C to +50°C. Storage -20°C to +80°C. Temperature coefficient Voltage and current are better than 100ppm/°C. Stability Less than 0.1% every 8 hours after 0.5 hours of booting. Dimensions 126mm wide, 102.5mm high and 228mm deep. High pressureCable The standard high-voltage cable is 2 meters long,with a shielded layer and can be plugged in. Weight 3kg. |